Bombardier SeaDoo 2000 factory shop manual volume 1, Page 398Get this manual
Section 12 HULLBODY Subsection 02 (ADJUSTMENT AND REPAIR)
STORAGE COMPARTMENT COVER ADJUSTMENT
Adjust lock pin no3 as per following specifications:
F07L09A
F02L25C
GTI, GTX RFI AND GTX MODELS 1Lock pin (apply Loctite 243) 2Rubber washer 3Flat washers A39.2 mm (1-3564 364 in)
GTS MODEL 1Lock pin 2Adjustment nut (Loctite 271) 3Lock nutTorque to Nm (44 lbfin) A37 mm (1-2964 364 in)
NOTE: The GTI, GTX RFI and GTX have floating type lock pinIt is normal to have front and aft play of the lock pinTo adjust, tighten lock pin until any vertical play is eliminatedMake sure front and aft play remains when pressing by hands1