Bombardier SeaDoo 2000 factory shop manual volume 1, Page 375Get this manual
Section 10 STEERING SYSTEM Subsection 03 (ADJUSTABLE STEERING)
Install steering support no24 to steering stem no19 and secure with pivot bolt no25Install nut and torque to 26 Nm (19 lbfft)1
F07K0UA
1Pad must not exceed stopper
F07K0RA
1Adjuster screw 2Apply Loctite 243 3Locking tie
Ensure wire harness is properly secured to steering support with locking tie
Position handle bar no22Install steering clamp no31 and secure with new elastic stop nuts M8Torque nuts to 26 Nm (19 lbfft) as per the following sequence