Bombardier SeaDoo 2000 factory shop manual volume 1, Page 272Get this manual
Section 08 ELECTRICAL SYSTEM Subsection 03 (CHARGING SYSTEM)
1Remove the sealing tube from the vent elbow
WARNING
Failure to remove the sealing tube could result in an explosion2Remove caps and fill battery to UPPER LEVEL line with electrolyte (specific gravity: 1.265 at 21C (70F))NOTE: This battery may fill slower than others due to the anti-spill check ball design
4Readjust the electrolyte level to the UPPER LEVEL line
A17E0RB
1Battery electrolyte 2Upper level line
5Connect battery charger for to hours3 2
A17E0FB