Bombardier SeaDoo 2000 factory shop manual volume 1, Page 258Get this manual
Section 08 ELECTRICAL SYSTEM Subsection 02 (IGNITION SYSTEM)
Access the BOSH SYSTEM in the MPEM programmer, then select ADJUSTMENT in the submenuChoose IGNITION in the ADJUSTMENT menuThe screen will display the actual ignition timing correction in degrees and it will also offer to adjust itRefer to the following chart to find the number corresponding to the timing correction neededTIMING CORRECTION CHART 787 RFI PROGRAMMER NUMBER (MPEM) IGNITION TIMING CORRECTION 4.50 3.75 2.25 .750.752.25
3Electrical connections4Engine startstop switch5Safety lanyard switch6Timer7Multi-Purpose Electronic Module (MPEM)8Magneto output (717 engine)9Ignition coil outputCAUTION: Whenever replacing component in ignition system, check ignition timingNOTE: To perform verification, good quality multimeter such as Fluke 73 (PN 529 022 000) should be used
Engine StartStop Switch Verification