Bombardier SeaDoo 2000 factory shop manual volume 1, Page 249Get this manual
Section 08 ELECTRICAL SYSTEM Subsection 02 (IGNITION SYSTEM)
If safety lanyard cap is reconnected within seconds, the current supply to gauges is cut for brief moment and comes back on with the audible signal of safety lanyard validationLow-Fuel Level Warning Device When the fuel level in the reservoir is low, the fuel level sensor transmits signal to the MPEMThe MPEM sends out signals for the beeper (RFI models only) and to the info center gaugeWhen the oil level is low in the reservoir, The MPEM sends out signal to the info center gauge and the pilot lamp on the gauge will turn onPower Distribution The MPEM distributes power from battery to all accessoriesAccessories are protected by fuses integrated in the MPEMFor fuse identification, refer to IGNITION SYSTEM TESTING PROCEDURE farther in this sectionOverheat Sensor When the engine temperature reaches threshold value, the MPEM triggers continuous beep to indicate overheatingDiagnostic Mode In order to facilitate the use of the watercraft, system controls the digitally encoded security system (DESS) and sends, through buzzer, some audible signals informing the operator of specific situationThe diagnostic mode is divided into parts: the basic mode and the advanced modeThe basic mode is automatically activated when connecting the safety lanyard cap to the switchThe advance mode can only be activated when pressing the startstop switchRefer DIGITALLY ENCODED SECURITY SYSTEM