Bombardier SeaDoo 2000 factory shop manual volume 1, Page 225Get this manual
Section 06 FUEL SYSTEM Subsection 05 (FUEL INJECTION)
ADJUSTMENT THROTTLE POSITION SENSOR (TPS)
This adjustment is very importantThe setting of the TPS will determine the basic parameters for all fuel mappingNOTE: Adjustment must be done each time the throttle position sensor (TPS) is loosened or removedCAUTION: An improperly adjusted TPS may lead to serious engine damageThe adjustment of the TPS is performed using the MPEM programmerLoosen the adjustment of the throttle cableClosed TPS
To perform this adjustment, proceed as follows: Access the BOSCH SYSTEM in the MPEM programmerThen, select ADJUSTMENT in the submenuChoose CLOSE TPS in the ADJUSTMENT menuThe screen will display the actual adjustment of the TPS in degrees and it will also offer to adjust itCAUTION: Do not select "YES" until the idle speed screw is loosened to allow the throttle plate to closeLoosen the lock nut of the idle speed screwLoosen the idle speed screw until it does not contact the throttle plate stopper