Bombardier SeaDoo 2000 factory shop manual volume 1, Page 218Get this manual
Section 06 FUEL SYSTEM Subsection 05 (FUEL INJECTION)
18 19 20 21
F07F16A F07F15A
The resistance should be between 2.3 and 2.5 at temperature of 20C (68F)If resistance value is incorrect, check wiring harness between AMP plug connector and fuel injectors for damaged wires or bad connectionsRepair if necessaryRecheck resistance value at AMP plug connector number 4If not within specification, replace the fuel injectorLeakage Test To perform leakage test, the injectors and fuel rail have to be removed from engineSee REMOVAL in this subsection for the procedureNOTE: Do not detach injectors from fuel railReconnect the wire connector of the injectorPlace each injector in clean bowlInstall the safety lanyard cap on the switch to activate the fuel pumpCheck for fuel leakage from the injector nozzleThere should be less than drop of fuel per minute