Bombardier SeaDoo 2000 factory shop manual volume 1, Page 201Get this manual
Section 06 FUEL SYSTEM Subsection 04 (CARBURETOR)
When installing O-rings no13 of low speed and high speed screws, apply some BOMBARDIER LUBE (PN 293 600 016) to prevent sticking
Fuel Accelerator Pump
Lubricate pump plunger, roller and cam with synthetic grease (PN 293 550 010) and roller shaft with BOMBARDIER LUBE (PN 293 600 016)
F01F11A
TYPICAL 1Pilot jet 2Gasket 3Main jet 4Check valve housing removed
F06F06B
Check Valve Assembly
The check valve is needed if back pressure occurs into carburetorIt will prevent fuel from flowing back into carburetor lower portionInspect check valve no11It should be free of holes, tears or imperfectionsReplace as needed1
TYPICAL 1Apply synthetic grease to plunger 2Apply BOMBARDIER LUBE on roller shaft