Bombardier SeaDoo 2000 factory shop manual volume 1, Page 188Get this manual
Section 06 FUEL SYSTEM Subsection 02 (FUEL CIRCUIT)
If pressure is not maintained locate leak and repairreplace component leakingTo ease leak search spray solution of soapy water on components, bubbles will indicate leak locationNOTE: The system must maintain pressure of 34 kPa (5 PSI) during 10 minutesNever pressurize over 34 kPa (5 PSI)Reconnect air inlet hose of fuel tank to body
WARNING
If any leak is found, do not start the engine and wipe off any fuel leakageDo not use electric powered tools on watercraft unless system has passed pressure testNOTE: Before removing the hose pincher, block with your finger the outlet fitting to feel if air is coming out when removing hose pincherThis will indicate that pressure relief valve and the outlet fitting are not blockedRemove hose pincher from fuel tank vent hose
F02F1XA
1Quick connect fitting 2Fuel rail