Bombardier SeaDoo 2000 factory shop manual volume 1, Page 157Get this manual
Section 04 ENGINE Subsection 08 (EXHAUST SYSTEM)
Torquing Sequence: Torque all screws by handDo not torque yetTorque the screws no7 to Nm (53 lbfin) and the nut no8 to Nm (27 lbfin), using the polygonal key (PN 529 035 505), as per the following illustration
F06D1VA
1Torque bolt to 40 Nm (29 lbfft)
F15D03A
NOTE: Apply Loctite 243 on the stud threadsRetorque the screws no7 to 48 Nm (35 lbfft) and the nut no8 to 38 Nm (28 lbfft)Use the same order as the previous stepTorque bolt of tuned pipe head above the engine magneto to 40 Nm (29 lbfft)