Bombardier SeaDoo 2000 factory shop manual volume 1, Page 135Get this manual
Section 04 ENGINE Subsection 06 (BOTTOM END)
Starter Drive Bearing
947 Engine To install bearing no23 of starter drive assembly, use pusher (PN 290 876 502) and handle (PN 420 877 650)
Apply Loctite 648 on mating surface of PTO flywheel and couplerApply Loctite 243 (blue) to Allen screws no21 of coupler and torque to 23 Nm (17 lbfft)
Final Assembly
717 and 787 RFI Engines For rotary valve timing and assembly procedures, refer to ROTARY VALVE787 RFI Engine When engine assembly is completed, add 30 mL (1oz) of motor oil SAE 30 to the counterbalance shaft gear through the crankcase filler plugF06D32A
1Handle 2Pusher
PTO Flywheel
787 RFI Engine Install O-ring onto crankshaft1