Bombardier SeaDoo 2000 factory shop manual volume 1, Page 124Get this manual
Section 04 ENGINE Subsection 06 (BOTTOM END)
To remove gear no14, first trace an index mark on the gear and counterbalance shaftNOTE: There is no Woodruff key to position the gear on the counterbalance shaftAn index mark must be traced to ease assembly procedure
F06D1HA
1Trace an index mark
F00D0SA
Remove seals no17Remove bearing no31 and washer no32Use press to remove gear no14
1Index mark
Use press to remove the gear no14 from the counterbalance shaft