Bombardier SeaDoo 2000 factory shop manual volume 1, Page 82Get this manual
Section 04 ENGINE Subsection 04 (MAGNETO SYSTEM)
Stator Assembly
787 RFI Engine Remove holding plate and withdraw plug from coverUnscrew bolts no20 and remove stator no9 from magneto cover3 1
Remove oil pump shaft from flywheel nut
F06D23A
1Remove oil pump shaft
Rotor and Flywheel
F07D0MA
787 RFI ENGINE 1Holding plate 2Stator assembly 3Remove screws
To remove the rotor no8 or the flywheel no3, the crankshaft must be lockedFor procedure, refer to BOTTOM ENDIf necessary, the magneto rotor can be removed without removing the engine flywheelRemove the six screws no17