Bombardier SeaDoo 2000 factory shop manual volume 1, Page 60Get this manual
Section 04 ENGINE Subsection 02 (LEAK TEST)
Bottom End and Top End
Remove the carburetor(s) and gasket(s)Make sure the surface of the intake manifold (717 and 947 engines) or rotary valve cover (787 RFI engine) are cleanInstall the intake plate(s) with fasteners from the kit and tighten adequatelyNOTE: For the 787 RFI and 947 engines, use the intake and exhaust plates included in the Supplementary Engine Leak Test Kit (PN 295 500 780)On engines with the RAVE system, remove the RAVE valves and gasketsInstall the RAVE valve plates with fasteners from the kit and tighten adequatelyNOTE: On engines with the RAVE system, the boot and O-ring can be checked for leakage with the valve in placeSimply remove the cover to expose the bootMake sure the spark plugs are installed and tightenBlock pulse hose using hose pincherNOTE: Do not block the rotary valve shaft hosesInstall pump to the exhaust plate fitting3