Bombardier SeaDoo 2000 factory shop manual volume 1, Page 51Get this manual
Section 03 TROUBLESHOOTING Subsection 01 (TROUBLESHOOTING CHART)
TROUBLESHOOTING CHART
The following is provided to help in diagnosing the probable source of troublesIt is guideline and should not be assumed to have all causes for all problemsNOTE: On GTX RFI and GSX RFI models, always check for active fault codes recorded in the ECU firstIf fault code is detected, service the fault code first and recheck operating conditionsRefer to FUEL INJECTION for the procedure and the fault code tableENGINE WILL NOT START
OTHER OBSERVATION POSSIBLE CAUSE DESS operation non functional REMEDY If short beeps are not heard when installing safety lanyard, refer to DIGITALLY ENCODED SECURITY SYSTEM Replace Check wiring then replace fuse Check wiring, solenoid and MPEM Checkrecharge Checkcleantighten Check, refer to subsection 02-04 Check, refer to subsection 08-04 Checkrepair as needed Check, refer to subsection 09-02 Check faulty codes in ECU memory, refer to subsection 06-05 Checkchargereplace Checkclean pump Inspect, refer to subsection 09-02 Check, refer to subsection 02-04 Check compression, refer to subsection 04-05 Check, refer to subsection 08-04