Bombardier SeaDoo 2000 factory shop manual volume 1, Page 47Get this manual
Section 02 MAINTENANCE Subsection 05 (STORAGE)
Fuel System
Sea-Doo Fuel Stabilizer (PN 413 408 600) or equivalent should be added in fuel tank to prevent fuel deterioration and, if so equipped, carburetor(s) gummingFollow manufacturer's instructions for proper useOn RFI models, fill up fuel tank completelyEnsure there is no water inside fuel tankCAUTION: Should any water be trapped inside fuel tank, severe internal damage will occur to the fuel injection systemNOTE: Fuel stabilizer should be added prior engine lubrication to ensure that the carburetor(s), if so equipped, is (are) protected against varnish deposits
PTO FLYWHEEL All Models Remove PTO flywheel guardLubricate PTO flywheel at grease fitting with synthetic grease (PN 293 550 010)CAUTION: Do not lubricate excessivelyImmediately stop when slight movement is noticed on rubber boot
WARNING
Fuel is flammable and explosive under certain conditionsAlways work in well ventilated areaAlways turn the fuel valve to OFF position when storing the watercraft (except RFI models)F01I0BA