Bombardier SeaDoo 2000 factory shop manual volume 1, Page 42Get this manual
Section 02 MAINTENANCE Subsection 03 (FLUSHING AND LUBRICATION)
Remove both spark plugs and spray BOMBARDIER LUBE lubricant into each cylinderConnect safety lanyard cap to the switchFully depress the throttle lever then press the startstop button to crank the engine few turns to distribute the oil onto cylinder wallGSX RFI and GTX RFI Models On RFI models, fully depress throttle lever and connect the safety lanyard to the switchPress the startstop button to crank the engine few turns and distribute the lubricant onto cylinder wallsNOTE: Proceeding in this order, no fuel will be injected into the engineApply anti-seize lubricant on spark plug threads then reinstall themReinstall plug on air intake silencer cover (GS, GTS and GTI models)NOTE: Engine fogging should be done with BOMBARDIER LUBE lubricant whenever the watercraft is to be stored for few days or long periodCAUTION: Never leave rags or tools in the engine compartment or in the bilge