Bombardier SeaDoo 2000 factory shop manual volume 1, Page 15Get this manual
INTRODUCTION
1Clean threads (bolt and hole) with solvent2Apply Loctite Primer (PN 293 800 041) on threads (bolt and nut) and allow to dry for 30 seconds3Choose proper strength Loctite threadlocker4Apply several drops along the threaded hole and at the bottom of the hole5Apply several drops on bolt threads6Tighten as required
Preassembled Parts
Stud in Blind Holes
A00A3OA
1Apply here 2Do not apply
A00A5RA