Bombardier SeaDoo 1999 factory shop manual, Page 146Get this manual
Section 04 ENGINE Subsection 07 (ROTARY VALVE)
Place puller over rotary valve shaft end and screw on puller bolt into shaftWhile retaining bolt with wrench, turn puller nut CLOCKWISE until shaft comes out
Shaft Bearing
To remove bearing no8 use bearing extractor such as Snap-on noCJ-950 (or equivalent) as illustratedSlide off distance sleeve no14, remove snap ring no7 and washer no15 then press shaft out
F01D61A
F01D4NA
1Hold bolt
1Bearing 2Bearing extractor Snap-on CJ-950