Bombardier SeaDoo 1999 factory shop manual, Page 66Get this manual
Subsection 03
Section 04 ENGINE (REMOVAL AND INSTALLATION)
Engine Support
NOTE: Be careful when removing engine support(s) or rubber mount adapters, shims could have been installed underneathShims control enginejet pump alignmentAlways note position of shims for reinstallation, to avoid altering engine alignmentRemove engine support mount screws
F07F12C
787 AND 947 ENGINES REAR SUPPORT 1Remove screws
Lifting Engine
717 Engine Engine can be easily lifted using the following suggested tools: Cut porcelain from old spark plugs Weld lock washer approximately 20 mm (34 in) diameter on each spark plug as shown