Bombardier SeaDoo 1998 factory shop manual, Page 401Get this manual
Section 14 WIRING DIAGRAMS Subsection 01 (WIRING DIAGRAMS)
Removal
To remove the plug connector from the header assembly, press both tabs and pull plug1 2
Each plug assembly is mechanically keyed to mate only with identical mechanical keyed header on the MPEM
F00H0NA
StepPress tabs (both sides) StepPull plug
Installation
Apply thin coat of DEOXIT contact lubricant (PN 293 550 015) to the pins of the header on the MPEM onlyF00H12A
1Mechanically keyed
Contact Removal