Bombardier SeaDoo 1998 factory shop manual, Page 400Get this manual
Section 14 WIRING DIAGRAMS Subsection 01 (WIRING DIAGRAMS)
WIRING DIAGRAMS
WIRE COLOR CODES
First color of wire is the main colorSecond color is the tracerExample: YELLOWBLACK is YELLOW wire with BLACK tracerAMP PLUG CONNECTOR
All Models Except SPX and GTS These connectors are found on the MPEMWhen servicing electrical system, special care must be taken when working with AMP Plug Connectors in order to prevent any malfunction of the system
WIRE DIGIT CODES
All Models Except SPX and GTS First number indicates in which connector the wire is plugged inSecond number indicates the position of the wire in the connectorThe letter at the end of the number (if applicable) indicates common circuit in the MPEM printed circuit with another wire bearing the same letterExample: 2-18 (g) The first number indicates that the wire is positioned in the connector no2 of the MPEMThe second number indicates that the wire is positioned in the terminal no18The letter (g) indicates common circuit with another wire(s) bearing the same letter (g) in the circuit