Bombardier SeaDoo 1998 factory shop manual, Page 325Get this manual
Section 10 STEERING SYSTEM Subsection 03 (GTS MODEL)
Insert grommet no14 in dashboard hole and pull it from inside bilgeNOTE: To ease installation, apply water on grommetInsert wires of monitoring beeper and startstop buttonInsert spring washer no15 and the shim no16 onto steering stem no17Insert steering stem into support no186 2
F01K0VA
TYPICAL 1Steering stem tenon 2Steering stem arm 3Mortise 4Large flat washer with 5Lock washer 6Screw, apply Loctite 271 and torque to 40 Nm (30 Ibfft)
F02K05A
Steering stem Grommet Spring washer Shim
Properly position steering stem arm no10 on steering stemMake sure to insert stem tenon into arm mortiseApply Loctite 271 (red) on threads of screw no13Install large flat washer no19, lock washer no20 and screw no13Torque screw to 40 Nm (30 Ibfft)