Bombardier SeaDoo 1998 factory shop manual, Page 272Get this manual
Section 09 PROPULSION SYSTEM Subsection 02 (JET PUMP)
Rotate impeller remover tool counterclockwise and unscrew completely impeller-
CAUTION
Never use any impact wrench to loosen impellerTo remove impeller, apply rotating movement and pull at same timeSlide impeller out of housingRemove tool from impeller
21, Wear Ring
Place jet pump housing in vise with soft jawsIt is best to clamp housing using lower earCut wear ring at two placesNOTE: Wear ring can be cut using jigsaw, small grinder or low clearance hacksaw such as Snapon HS3 or equivalentF01J0WA
TYPICAL 1Snap-on HS3
CAUTION