Bombardier SeaDoo 1998 factory shop manual, Page 190Get this manual
Section 06 FUEL SYSTEM Subsection 04 (CARBURETOR)
Throttle Cable
Lubricate cable with BOMBARDIER LUBE lubricantThrottle lever must reach handlebar grip without causing strain to cable or carburetor cable bracket
F01F32B
F01K08A
1Must touch handlebar grip
787 ENGINE 1Throttle lever stoppers (behind levers) 2Adjustment nut
Ensure carburetor throttle plate(s) is (are) fully open at full throttle positionAt this position, throttle lever stopper is almost in contact (0.5 mm (164 in)) with carburetor bodyNOTE: Apply light pressure on the throttle plate(s), slight play should be obtained-
CAUTION
Improper cable adjustment will cause strain on cable andor damage cable bracket or throttle lever at handlebarTo adjust, loosen jam nut then turn adjustment nut as necessaryF06F0FA