Bombardier SeaDoo 1998 factory shop manual, Page 159Get this manual
Section 05 COOLING SYSTEM Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
COMPONENTS
To cut or secure non-reusable Oetiker clamps of cooling system hoses, use pliers (PN 295 000 070)-
CAUTION
The elbow fittings are calibrated and can not be interchanged with one of different size as severe engine damage could resultThe elbow fitting can be identified by using the number stamped onto the fitting or by measuring its inside diameterRefer to the following illustration and chart
F00E04A
F01B2KA
1Outlet diameter4.6 mm (.181 in) 2Stamped number 3Inlet diameter5.5 mm (.219 in)
1Cutting clamp 2Securing clamp