Bombardier SeaDoo 1998 factory shop manual, Page 120Get this manual
Section 04 ENGINE Subsection 06 (BOTTOM END) F00D0MA
1Keyway 2Long flange toward the crankshaft counterweight
F06D1LA
At seal assembly, apply light coat of lithium grease on seal lips
1Seal lip in crankcase recess
6, Drive Pin
Make sure drive pins of bearings are properly installed in crankcase recesses at assembly1
787 Engine Position PTO seal against the retaining shim; the gap between the seal and bearing will ensure proper lubrication of the bearing