Bombardier SeaDoo 1998 factory shop manual, Page 75Get this manual
Section 04 ENGINE Subsection 04 (MAGNETO SYSTEM)
4,5, Rotor and Flywheel
Apply Loctite 648 (green) on mating surface of the rotor no4When reinstalling rotor to flywheel, one of the protrusion end of rotor must be aligned with hole in flywheel1 2
Install flywheel and make sure to align keyway with the crankshaft Woodruff keyApply Loctite 242 (blue) on nut no6Install nut with lock washer and torque to 115 Nm (85 lbfft)-
CAUTION
Never use any type of impact wrenchUnlock crankshaftReinstall pulse fitting with washer and torque to 19 Nm (14 lbfft)