Bombardier SeaDoo 1998 factory shop manual, Page 74Get this manual
Subsection 04
Section 04 ENGINE (MAGNETO SYSTEM)
Apply Loctite 242 (blue) on nut no6Install nut with lock washer and torque to 105 Nm (77 lbfft)
CAUTION
Never use any type of impact wrench at magneto installation
F04D0CA
Before installation, properly install O-ring no3 in engine magneto coverApply Loctite 767 anti-seize compound on screws no2Torque screws in criss-cross sequence to Nm (80 lbfin)
Install gasket no8 between magneto housing and engine crankcaseInstall magneto housing and torque screws no9 to Nm (80 lbfin)
947 Engine