Bombardier SeaDoo 1998 factory shop manual, Page 61Get this manual
Section 04 ENGINE Subsection 03 (REMOVAL AND INSTALLATION)
Engine Support Screws Apply Loctite 242 (blue) on screw threadsTorque engine support screws to 25 Nm (18 lbfft) when procedure is completedLoctite 242 Loctite 242 1
F06D36A
1 Loctite 242
REAR ENGINE SUPPORT 787 AND 947 ENGINES 1Torque to 25 Nm (18 lbfft)
Final Inspection
Check throttle cable condition and lubricate cable with BOMBARDIER LUBE lubricantAfter its installation, properly adjust and bleed oil injection pump as specified in OIL INJECTION PUMP 07-03Check hose condition and pressure test fuel system, refer to FUEL CIRCUIT 06-02