Bombardier SeaDoo 1998 factory shop manual, Page 40Get this manual
Section 02 MAINTENANCE Subsection 05 (STORAGE)
SEAL CARRIER
CAUTION
Battery
For battery removal, cleaning and storage, refer to CHARGING SYSTEM 08-03
Never leave any clothing, tool or other objects near PTO flywheel and drive shaft
Watercraft Cleaning
Clean the bilge with hot water and mild detergent or with bilge cleanerRinse thoroughlyLift front end of watercraft to completely drain bilgeIf any repairs are needed to body or to the hull, touch up paint and Gelcote repair kit are availableReplace damaged labelsdecalsWash the body with soap and water solution (only use mild detergent)Rinse thoroughly with fresh waterRemove marine organisms from the hullApply nonabrasive wax
GSX Limited, XP Limited and GTX Limited Lubricate seal carrier of thru hull fitting with synthetic grease (PN 293 550 010)Stop lubricating when grease is just coming out of seal-
CAUTION
Never clean fiberglass and plastic parts with strong detergent, degreasing agent, paint thinner, acetone, etcIf the watercraft is to be stored outside, cover it with an opaque tarpaulin to prevent sun rays and grime from affecting the plastic components, watercraft finish as well as preventing dust accumulation