Bombardier SeaDoo 1997 factory shop manual, Page 220Get this manual
Section 08 PROPULSION SYSTEM Sub-Section 02 (JET PUMP)
Apply Loctite 242 (blue) on screw threads and evenly tighten cover screwsTorque to Nm (35 lbfin)Oil Fill NOTE: It is highly recommended to perform leakage test prior adding the oilRefer to PUMP PRESSURIZATION in this sub-sectionPlace housing horizontally as in its operating position so that filler plug is located on topRemove filler plug from coverPour SEA-DOO JET PUMP SYNTHETIC OIL (PN 293 600 011) in reservoir until oil comes level with bottom of holeLet oil drain into housing and after few minutes add more oil until it is level with bottom of filler holeOil capacity is 70 mL (2.4 oz)
F00J0KA
1O-rings
CAUTION
This is synthetic oilDo not mix with mineral based oilDo not mix oil brandsNOTE: When filling reservoir, oil must be poured into cover quite slowly to allow complete housing fill