Bombardier SeaDoo 1997 factory shop manual, Page 218Get this manual
Section 08 PROPULSION SYSTEM Sub-Section 02 (JET PUMP)
NOTE: If jet pump housing rest against table, raise it slightly to allow complete shaft insertion with the shaft guideRemove shaft guide
20, Impeller
Apply Loctite primer (PN 293 600 012) on threads of impeller shaft no24Allow to dry for minutesNOTE: Loctite primer is used to reduce Loctite 271 curing time and to activate stainless steel and aluminum surfaces for better bonding actionIf applied, complete curing time is hours, if primer is not used, allow 24 hours for curing timeApply Loctite 271 (red) to shaft threads