Bombardier SeaDoo 1997 factory shop manual, Page 215Get this manual
Section 08 PROPULSION SYSTEM Sub-Section 02 (JET PUMP)
NOTE: To ease insertion into housing, apply BOMBARDIER LUBE lubricant (PN 293 600 016) onto outside circumference of wear ringTo install ring in housing, use square steel plate of approximately 180 180 mm mm thick (7 in 14 in) and pressManually engage ring in housing making sure it is equally inserted all aroundPress ring until it seats into bottom of housing2 1
F01J5EA
1Piece of wood 2Seal lip facing upward 3Wear ring
22,23, Seal and Needle BearingF01J5DA
Bearings and seal will be properly installed in housing using bearingseal installer tool (PN 295 000 107)1