Bombardier SeaDoo 1997 factory shop manual, Page 178Get this manual
Section 07 ELECTRICAL SYSTEM Sub-Section 03 (CHARGING SYSTEM)
Perform the following operations anytime new battery is to be installed1Remove the sealing tube from the vent elbow
WARNING
Failure to remove the sealing tube could result in an explosion2Remove caps and fill battery to UPPER LEVEL line with electrolyte (specific gravity: 1.260 at 21C (70F))NOTE: This battery may fill slower than others due to the anti-spill check ball design
A17E0RB
1Battery electrolyte 2Upper level line
5Connect battery charger for to hours2
A17E0FB
A17E0IA