Bombardier SeaDoo 1997 factory shop manual, Page 168Get this manual
Section 07 ELECTRICAL SYSTEM Sub-Section 02 (IGNITION SYSTEM)
6Set Bombardier Ignition Tester as per following table:
Tester probe Adapter wire REDBLUE LOW BLACK 60
F01B28A
Tester switch position
Tester dial position
3Connect one multimeter lead to the WHITE wire of the six-pin magneto harness adapter4Connect the other multimeter lead to the BLACKYELLOW wire of the six-pin magneto harness adapter5Measure resistance; it should be between 190300 ohms
F01H5XA
Bombardier ignition tester Four-pin magneto harness adapter Probe "N" to REDBLUE wire Probe "P" to BLACK wire