Bombardier SeaDoo 1997 factory shop manual, Page 162Get this manual
Section 07 ELECTRICAL SYSTEM Sub-Section 02 (IGNITION SYSTEM) F06H07A A25E0RA
1Timing light straight in line with tool slot
CAUTION
TYPICAL 1To retard 2To advance
If engine is to be run more than few seconds, engine must be cooled using the flush kitNOTE: If mark on PTO flywheel is perfectly aligned with timing mark pointer, no adjustment is requiredIf it is not the case, refer to Ignition Timing Adjustment in this sub-section
To adjust, loosen armature plate retaining screws and slightly rotate armature plate in proper directionNOTE: As guideline, turn the armature plate the same amount needed to align mark on PTO flywheel