Bombardier SeaDoo 1997 factory shop manual, Page 42Get this manual
Sub-Section 04
Section 03 ENGINE (MAGNETO SYSTEM)
GENERAL
The following procedures can be performed without removing engine from watercraftHowever, battery removal will be required on SP and GTS modelsREMOVAL
717 Engines
1, Magneto Housing Cover
Remove screws no2, wire supports no17 and no18, then withdraw cover
4,5, Magneto Flywheel and Ring Gear
Magneto flywheel is locked with puller plate (PN 290 876 080), sleeves (PN 290 847 220) and extension handle (PN 295 000 111)1 2
F01D48A
TYPICAL 1Sleeves on opposite side