Bombardier SeaDoo 1997 factory shop manual, Page 21Get this manual
Section 01 MAINTENANCE Sub-Section 05 (STORAGE)
Anticorrosion Treatment
Wipe off any residual water in the engine compartmentSpray BOMBARDIER LUBE lubricant over all metallic components in engine compartmentLubricate the throttle cable with BOMBARDIER LUBE lubricantNOTE: cable luber can be used on throttle cable end to inject BOMBARDIER LUBE lubricantThe seat should be partially left opened during storage (the engine cover for the XP and HX models)This will avoid engine compartment condensation and possible corrosionNOTE: If the watercraft is stored outside with seat (or the engine cover for the XP and HX models) partially opened and without tarpaulin, unscrew the rear drain plug(s) in order to avoid water build up in the bilge during rainfallTilt the watercraft to the rear so that water can flow out
F02E02B
Additional Recommended Protection
In cool regions (where freezing point temperature may be encountered), cooling system should be filled with water and antifreeze solution