Bombardier SeaDoo 1997 factory shop manual, Page 13Get this manual
Sub-Section 03
Section 01 MAINTENANCE (FLUSHING AND LUBRICATION)
FLUSHING AND LUBRICATION
GENERAL
Flushing the cooling system with fresh water is essential to neutralize corroding effects of salt or other chemical products present in waterIt will help to clean up sand, salt, shells or other particles in water jackets (engine, exhaust manifold, tuned pipe) andor hosesFlushing and engine lubrication should be performed when the watercraft is not expected to be used further the same day or when the watercraft is stored for any extended time
SP, SPX, GTS and XP Models Remove dust cap from fitting spigot and attach coupler hose (PN 295 500 258)Make sure coupler hose is properly locked to fitting spigotInstall hose pincher on water outlet hose-
CAUTION
This prevents water from exiting through outlet socketRemove hose pincher after flushing operation1 3
CAUTION
Failure to flush cooling system, when necessary, will severely damage engine andor exhaust systemNever flush hot engineMake sure engine operates during entire procedure