Bombardier SeaDoo 1996 factory shop manual, Page 223Get this manual
Section 09 PROPULSION SYSTEM Sub-Section 01 (JET PUMP)
Apply Loctite 242 (blue) on stud threads of jet pump housingInstall flat washers, lock washers and nutsTighten nuts of impeller housing in criss-cross sequence and torque to 35 Nm (26 lbfft)Push the floating ring to compress the protective hoseInsert the O-ring in the drive shaft groove
F01I0DA
1O-ring 2Floating ring
Position the floating ring between the carbon ring and the PTO flywheel bootF02I04A
Step Push floating ring Step Insert O-ring in the groove