Bombardier SeaDoo 1996 factory shop manual, Page 221Get this manual
Section 09 PROPULSION SYSTEM Sub-Section 01 (JET PUMP)
F05J05A
F01J2IA
Installation of support is essentially the reverse of removal procedure
Pump must maintain this pressure for at least 10 minutesCAUTIONRepair any leak, failure to correct leak will lead to premature wear of pump componentsNOTEIf there is pressure drop spray soapy water around housing coverIf there are no bubbles, impeller shaft, impeller shaft seal, or impeller housing is leaking through porosity and has to be replacedJet pump unit has to be disassembled Disconnect pump gauge tester and remove fitting Check oil levelRefill as necessary Apply Loctite PST 592 to threads of filler plug then secure it in cover-