Bombardier SeaDoo 1996 factory shop manual, Page 208Get this manual
Section 09 PROPULSION SYSTEM Sub-Section 01 (JET PUMP)
14,15, Boot and Ring
Pull out ring from boot
F01J0SA
1Hold raised with drive shaft while striking
F01J09A
16, Fitting
Fittings can be removed with deep socket or vise gripDo not contact hose mounting areaFitting can be removed from pump housing with the following suggested toolUse 14 mm (916 in) deep socket Drill deep socket with 14 mm (916 in) drill bit, starting at hexagone head end as shown in following illustration Drill 2.40 mm (332 in) hole in center of deep socket as shown in following illustration Install 2.40 mm (332 in) roll pin in the center hole