Bombardier SeaDoo 1996 factory shop manual, Page 144Get this manual
Section 07 LUBRIFICATION SYSTEM Sub-Section 02 (OIL INJECTION PUMP)
Final Synchronization
Eliminate throttle cable free-play by depressing throttle lever until slight resistance is feltIn this position, marks on pump body and lever must alignNOTEmirror may be used to facilitate this verificationIf necessary, turn cable adjustment screw to obtain pump mark alignmentRefer to above illustrationsTighten jam nut and recheck alignment marksCAUTIONProper oil injection pump adjustment is very importantAny delay in the opening of pump can result in serious engine damage
787 Engine
F01G0RB
1Bleed screw
Bleeding
erating engineEnsure oil injection reservoir is sufficiently filledInstall dry rag below oil injection pumpLoosen bleed screw to allow oil to flow: Oil injection system must beCAUTIONadjustment checked before opbled and