Bombardier SeaDoo 1996 factory shop manual, Page 109Get this manual
Section 05 COOLING SYSTEM Sub-Section 02 (CIRCUIT)
For minimum back pressure in the exhaust, engine water outlet hose is not connected to the exhaustIt has its own fitting at the rear of the hull
TECHNICAL DATA TYPETLCS (Total Loss Cooling System)
COOLANT FLOW :
Pressure build-up at impeller housing (no water pump)
TEMPERATURE CONTROL :
Calibrated outlet fittings (no thermostat)
SYSTEM BLEEDING :
Self-bleed type (hose at uppermost point of circuit)
SYSTEM DRAINING :
Self-drain type (hose at lowest point of circuit)