Bombardier SeaDoo 1994 factory shop manual, Page 105Get this manual
Section 04 COOLING SYSTEM Sub-section 03 (FLUSHING AND CARE)
FLUSHING CARE
CAUTIONAll hoses and fittings of the cooling system have calibrated inside diameters to assure proper cooling of the engineAlways replace using appropriate Bombardier part number
FLUSHING
Flushing the cooling system with fresh water is essential to neutralize corroding effects of salt or other chemical products present in waterIt will help to clear sand, salt, shells or other particles in water jackets (engine, exhaust manifold, tuned pipe) andor hoses Flushing should be performed when the watercraft is not expected to be used further the same day or when the watercraft is stored for any extended time CAUTIONFailure flush cooling system, necessary, will severely damage engine andor exhaust systemNever flush hot engineMake sure engine operates during entire procedureWARNINGDo not touch any electrical parts or jet pump area when engine is running3 outkt Clean Jet Pump by spraying water in its
6, Elbow Fitting
Water injection used on exhaust system cools the