Bombardier SeaDoo 1992 factory shop manual, Page 223Get this manual
Section 10 HULLjBODY Sub-section 01 (HULLBODY)
16,17, Gas,ket and Fitting
Slide gasket (PN 293 250 006)on fitting (PIN 293 710 015)Install through air intake hole the fitting in water tank trapInstall outside the tanka second gasket on the fitting, install the nut and then tighten until the gaskets are compressedInstall drain hose on the fitting and tighten with gear clamp
Sikafllex primer 449 and Sikaftex sealant 221
Install rear baffle on body, align properly rear inlet grill openings and hold in position with light pressureReinstall rear vent hose, exhaust formed hose and air silencercuring
Before ulsing the watercraft wait three days for Sikaflex time