Bombardier SeaDoo 1992 factory shop manual, Page 209Get this manual
Section 08 PROPULSION AND DRIVE SYSTEMS Sub-Sectioln 03 (VARIABLE TRIM (VTS1)l
16, Sliding Collar
Turn trim knob counterclockwise until sliding collar touches the set screwMake sure the nozzle is in down positionTurn knob
When the trim knob is turned counterclockwise the nozzle must be down (10') and it must not interfere with venturihousing
Turn knob counterclockwise
counterclockwise
No interference
IF001 124 F001 009 127
Install cable in sliding collar with washer and nut on each sideTorque nuts to Nm (44 Ibfain)Install retaining plate over cable housing