Bombardier SeaDoo 1992 factory shop manual, Page 194Get this manual
Section 08 PROPiULSIONAND DRIVE SYSTEMS Sub-section 01 (PROPULSION AND DRIVE SYSTEMS)
37,38,39,40,41, Shoe, Ride Screw and Grill1
Apply Loctite 587 Superflex Ultra Blue (PIN 293 800 0161 on ride shoe as shown in the following illustrationPush bearing centered in its housing
Ultra Blue as indicated by shaded area
Ultra Blue on left and naht ribs
49,50,52, Seal and Seal Carrier
Install double-tip seal toward impeller side and single lip seal toward engine sideOn both seals, raised edge of lip must be located outwards of seal carrier
Carefully install ride shoe on hullApply Loctite 242 (blue)2913 800 015) on screw threads, install and tighten in criss-cross sequlenceTorque to 10 Nrrn (88 IbfeinlFrom inside of bilge, apply Loctite 732 RTV Silicone IFIN 293 800 006) on end of screws to completely seal hull