Bombardier SeaDoo 1992 factory shop manual, Page 120Get this manual
Section 05 FUEL SYSTEM
Su b-Section 03
(CARBUIRETORS)Start engine and bring to normal operating temperatureCAUTION :Water must be supplied GQOI engine with flush kit295 000 0381, Turin screw so that engine idles bletween1300 to 1500 RPM [in water) or 2800 to 3000 RPM (out of water)" Stolp engine and recheck oil injection pump aligning marks andreadjust as necessaryCAUTIONOil injection pump adjulstrnent must be checked each time carburetors are adjusted Improper ail pump adjustment can cause severe engine damage
NOTETo minimize time of fuel system pressurization the fuel tank should be quite fullThe system must maintain pressure of 34 kPaPSI) during 10 minutesNever pressurize over 34 kPa (5PSI)
FUEL SYSTEM PRESSURIZATIlON
WARINING :Whenever doing any type of repair on watercraft or if alny cornponentsof the fuel system are disconnected, pressure test must be done before starting engine andor releasing watercraft customerCAUTION: Ensure verify fuel lline ends for damageAlways cut damaged end before reinstallation